Description
Blue Razz Gummy Bear PIXL 5K Pods
Blue Razz Gummy Bear PIXL 5K Pods are a replacement pod pack for the PIXL 5K Prefilled Pod Kit — 6ml of Blue Razz Gummy Bear 20mg nicotine salt e-liquid (1x 2ml prefilled pod + 1x 4ml refill container), delivering up to 5,000 puffs from a 1.1Ω mesh coil. No device included. Browse all 16 flavours in the PIXL 5K Pods collection. Blue Razz Gummy Bear is also listed as Blue Razz GB — GB stands for Gummy Bear. Both names refer to the same flavour: electric blue raspberry combined with gummy bear sweetness. What Does Blue Razz Gummy Bear Taste Like?
The Blue Razz Gummy Bear 20mg nicotine salt formula, heated by the 1.1Ω mesh coil in 50/50 VG/PG: Inhale: Electric blue raspberry sweetness opens — vivid, candy-forward, and immediately recognisable from the first puff. Mid-note: Gummy bear sweetness joins at mid-draw — soft, chewy-sweet, and nostalgic, adding a candy store warmth to the blue razz. Exhale: A sweet, playful candy-blue close. No sharpness — all sweetness. The gummy bear note carries through to the finish. Sensation: A notably candy-sweet profile in the PIXL 5K range. Blue razz combined with gummy bear sweetness — concentrated, nostalgic, and vivid. Explore PIXL Nic Salt E-Liquid and the full PIXL range at Vapourcore. 6ml System — How the 2ml + 4ml Works
Each Blue Razz Gummy Bear PIXL 5K Pod pack contains a 2ml prefilled Blue Razz Gummy Bear pod and a 4ml Blue Razz Gummy Bear refill container — 6ml of 20mg nicotine salt in total. The 4ml refill automatically tops up the 2ml pod as e-liquid is consumed during use. No manual intervention is required at any point. Unlike the initial kit setup, replacement pod packs arrive pre-assembled — the 2ml pod and 4ml refill container are a single unit ready to click into the device. When both are exhausted — signalled by a noticeable reduction in Blue Razz Gummy Bear flavour intensity or vapour volume — the entire pod pack is replaced. Each replacement includes a fresh 1.1Ω mesh coil sealed inside the pod. If you need the compatible device, visit the PIXL brand hub for the full range. 1.1Ω Mesh Coil + 50/50 VG/PG — More Consistent Flavour (Usage Dependent)
Every PIXL 5K Pod uses a 1.1Ω mesh coil — confirmed from supplier documentation, and a specification not always listed on retailer pages. At 1.1Ω, the coil resistance is matched to the MTL draw style: tight, controlled, and reliable across the full lifespan of each pod pack. Mesh coil technology distributes heat more evenly across the coil surface, which helps keep Blue Razz Gummy Bear flavour delivery more accurate across the pod’s life (usage dependent). The 50/50 VG/PG formula is matched to this resistance — producing a cleaner, crisper flavour delivery than higher-VG blends would in an MTL configuration. A fresh 1.1Ω coil is included with every replacement pod pack. For standalone e-liquid options, browse the PIXL Nic Salt E-Liquid range via the PIXL brand hub linked above. Specifications Flavour
Blue Razz Gummy Bear Product Type
Replacement pod pack — no device included Pack Contents
1 × 2ml prefilled pod + 1 × 4ml refill container Total E-Liquid
6ml per pack Puffs
Up to 5,000 Nicotine Strength
20mg (2%) Nicotine Type
Nicotine Salt PG/VG Ratio
50/50 Coil
1.1Ω mesh (integrated into pod) Activation
Draw-activated (via PIXL 5K device) Vaping Style
MTL (Mouth-to-Lung) Compatible Device
PIXL 5K device only Refillable
No — sealed pod, replace when exhausted Dimensions
34mm × 125mm × 27mm Weight
36g TPD Compliant
Yes How to Replace Your PIXL 5K Pod Remove the exhausted pod pack from your PIXL 5K device.
Unpack the new Blue Razz Gummy Bear pod pack and remove all protective seals.
Insert the pre-assembled pod unit into the device until it clicks securely.
Wait a few seconds for the Blue Razz Gummy Bear e-liquid to saturate the 1.1Ω mesh coil — this helps reduce the chance of dry hits on the first draw.
Inhale through the mouthpiece to begin vaping — draw-activated, no button required. For the compatible device, visit the PIXL 5K Prefilled Pod Kit page. For delivery information, visit our delivery and shipping page. FAQs
What does Blue Razz Gummy Bear PIXL 5K taste like?
A notably candy-sweet profile in the PIXL 5K range. Blue razz combined with gummy bear sweetness — concentrated, nostalgic, and vivid. The Blue Razz Gummy Bear 20mg nicotine salt formula uses a 50/50 VG/PG blend heated by the 1.1Ω mesh coil, which distributes heat more evenly for more consistent Blue Razz Gummy Bear flavour from first draw to last puff of the 5,000-puff pack (usage dependent). How many puffs does Blue Razz Gummy Bear PIXL 5K give?
Up to 5,000 puffs from the 6ml total (2ml Blue Razz Gummy Bear pod + 4ml refill container). The 4ml refill automatically tops up the 2ml pod as it depletes. When flavour or vapour noticeably drops, the pack is exhausted — replace with a new Blue Razz Gummy Bear PIXL 5K Pod pack. Are Blue Razz Gummy Bear PIXL 5K Pods a replacement, refill, or prefilled pod?
All three terms describe the same product. Blue Razz Gummy Bear PIXL 5K Pods are a prefilled replacement pack — the 2ml pod comes prefilled with Blue Razz Gummy Bear 20mg nicotine salt e-liquid, paired with a 4ml Blue Razz Gummy Bear refill container. No manual refilling is required. When exhausted, the entire pack is replaced as a single pre-assembled unit. What coil do Blue Razz Gummy Bear PIXL 5K Pods use?
Each Blue Razz Gummy Bear PIXL 5K Pod contains a 1.1Ω mesh coil, sealed inside the 2ml pod. The mesh coil heats the 50/50 VG/PG Blue Razz Gummy Bear e-liquid more evenly for more consistent taste throughout the pod’s life (usage dependent). A fresh 1.1Ω coil comes automatically with every replacement pack — no separate coil needed. Which devices are Blue Razz Gummy Bear PIXL 5K Pods compatible with?
Blue Razz Gummy Bear PIXL 5K Pods are compatible with the PIXL 5K device only. They are not compatible with the PIXL 8000, PIXL Duo 12, or any non-PIXL device. Ensure you own the PIXL 5K device before ordering replacement pods. How do I fit a Blue Razz Gummy Bear PIXL 5K Pod?
Remove the empty pod from your PIXL 5K device. Unpack the new Blue Razz Gummy Bear pod pack and remove all protective seals. Insert the pre-assembled unit into the device until it clicks securely. Wait a few seconds for the mesh coil to absorb the Blue Razz Gummy Bear e-liquid — this helps reduce the chance of dry hits. Inhale to begin vaping — draw-activated, no button needed. Important Information UK TPD compliant
Contains 20mg (2%) nicotine salt — nicotine is addictive
Not suitable for non-smokers, those who have never vaped, or people who are pregnant
If you have a medical condition or are taking medication, seek advice from a healthcare professional before use
Keep out of reach of children and pets
Compatible with PIXL 5K device only
Sealed pod — not refillable. Replace the full pack when exhausted
For return queries, visit our returns page
