Description
OXVA NexLIM 2 Pod Vape Kit
The OXVA NexLIM 2 Pod Vape Kit is a refillable pod vape kit built around four technologies: the Super Pulse System, which maintains consistent performance as the battery depletes; Power Mode and ECO Mode for control over output and battery life; the Unitech 3.0 Dual Mesh coil system for even heat and richer flavour; and a three-level precision airflow with three specific positions covering tight MTL through to open RDL. Powered by a 2000mAh battery with 5–40W adjustable output. Inhale-activated. Top-fill 2ml pods (UK/TPD). 9 colours. UK TPD compliant. Browse the full OXVA range at Vapourcore. 18+ only. This is a refillable vape device — no e-liquid or nicotine is included. 2000mAh Battery — A Full Day, Every Day
The NexLIM 2 carries a 2000mAh battery — large for a pod kit at 88.5g. For most vapers at typical daily use, that means a full day without needing to reach for a charger. When the battery does need topping up, 3A fast-charging USB-C handles it quickly: 80% charge in 20 minutes, full charge in 50 minutes. Cable included in the box. The Super Pulse System — covered in detail below — ensures the battery’s capacity is used consistently rather than fading as the charge drops. The colour display shows battery level, current wattage, active mode, and puff count at a glance. Super Pulse System — Consistent Performance All Day
Most pod kits produce progressively weaker draws as the battery drops. As charge falls from 100% to 20%, wattage drifts downward — flavour fades, vapour production falls, and draws feel noticeably weaker toward the end of a charge cycle. The NexLIM 2’s Super Pulse System is designed to prevent this. It maintains a stable wattage output throughout the charge cycle, compensating for battery depletion to sustain consistent output from the first puff to the last. The practical result: the Super Pulse System is designed to keep output more consistent across the charge cycle (usage dependent), reducing the gradual performance fade that standard pod kits produce as the battery depletes. The draw does not change noticeably until the device signals that it needs charging. Power Mode and ECO Mode — Two Ways to Vape
The NexLIM 2 offers two distinct output modes, selectable on the device with the active mode confirmed on the colour display. Power Mode sets the device to maximum output within the 5–40W range. Draws are stronger, vapour production is higher, and the Unitech 3.0 Dual Mesh coil delivers maximum flavour intensity. Use Power Mode for morning sessions, post-meal vaping, or any time full flavour and cloud production are the priority. ECO Mode reduces the output to conserve battery life. The experience is lighter, but the battery lasts longer between charges. Use ECO Mode when charging is not immediately available or when lighter vaping is preferred toward the end of the day. Switch between modes as the session demands — not just when the battery runs low. Three-Level Precision Airflow — MTL to RDL
The NexLIM 2’s airflow system has three specific positions — not a continuous slider, not just open and closed. Each position has a distinct draw character and pairs with a specific pod resistance and e-liquid type. Position 1 — Tight MTL: a restricted, cigarette-like draw. Pairs with the 0.8Ω pod and 20mg nicotine salt. Closest to the experience of smoking for those switching from cigarettes. Position 2 — Medium MTL/RDL: a balanced crossover between tight and loose. Works well with 50/50 e-liquid or 10mg nicotine salt. Neither fully restricted nor fully open — the most versatile position for everyday use. Position 3 — Open RDL: a looser, more vapour-forward draw. Pairs with the 0.6Ω pod and 3–6mg freebase e-liquid at the higher end of the wattage range. Suited to vapers who want more cloud and a less restricted inhale. Browse the full range of refillable pod vape kits at Vapourcore. Unitech 3.0 Dual Mesh — NexLIM Pods Explained
Unitech 3.0 is OXVA’s dedicated pod technology for the NexLIM 2. The Dual Mesh design uses two mesh coil surfaces that heat the e-liquid simultaneously — more even heat distribution across the coil, richer and more consistent flavour, and longer coil life compared to a single mesh design. Two pods are included in the box. The 0.6Ω pod (pre-installed) is suited to RDL vaping with more vapour production at higher wattage. The 0.8Ω pod (spare in box) is suited to MTL vaping with a tighter draw at lower wattage. Important: the NexLIM 2 uses OXVA NexLIM replacement pods (Unitech 3.0 series). These are NOT compatible with OXVA Xlim pods, XROS pods, or any other OXVA pod range. Buyers switching from another OXVA device will need to purchase NexLIM-specific replacement pods. Order OXVA NexLIM replacement pods (3-pack) at Vapourcore. E-Liquid Guide by Resistance
The right e-liquid depends on the pod resistance fitted and the airflow position used. Pod
Draw Style
Recommended E-Liquid 0.6Ω (pre-installed)
RDL — looser draw, more vapour
3–6mg freebase, 50/50 or 60/40–70/30 VG/PG 0.8Ω (spare in box)
MTL — tight, cigarette-like
20mg nicotine salt (50/50) OR 50/50 freebase 3–6mg OXVA NexLIM 2 vs Original NexLIM
For existing NexLIM users considering an upgrade, the NexLIM 2 is a significant step up across six specifications. Feature
NexLIM (original)
NexLIM 2 Battery
1500mAh
2000mAh (+33%) Pod system
Previous OXVA pod system (not Unitech 3.0)
Unitech 3.0 (own system) Display
0.96″ TFT
Full colour display Power modes
—
Power Mode + ECO Mode Super Pulse
No
Yes Three-level airflow
No
Yes Note: the NexLIM 2 uses a different pod system from the original NexLIM. Existing NexLIM pods are not compatible with the NexLIM 2. Replacement Unitech 3.0 pods are required and are available separately. OXVA NexLIM 2 Specifications Feature
Detail Battery
2000mAh built-in rechargeable Output
5W–40W adjustable Charging
3A USB-C fast charging Charge time
80% in 20 minutes / full charge in 50 minutes Display
Colour display (wattage, battery, mode, puffs) Pod capacity
2ml (UK/TPD version — top-fill) Coil technology
Unitech 3.0 Dual Mesh Pods in box
0.6Ω (pre-installed) + 0.8Ω (spare) Airflow
Three-level precision airflow (tight MTL / medium MTL-RDL / open RDL) Power modes
Power Mode + ECO Mode Super Pulse System
Yes — consistent output as battery depletes Compatible pods
OXVA NexLIM replacement pods (Unitech 3.0 only) Construction
Zinc alloy frame + PCTG body Activation
Inhale-activated Weight
88.5g Dimensions
127.5 × 28.5 × 17.5mm Colours
Black Leather, Black Warrior, Bright Brown Leather, Color Clash (Special), Green Leather, Mocha Brown Leather, Pearly White, Shiny Pink, Shiny Purple TPD compliant
Yes — UK legal What’s in the Box 1x OXVA NexLIM 2 2000mAh device
1x OXVA NexLIM UniTech 2ml 0.6Ω cartridge (pre-installed)
1x OXVA NexLIM UniTech 2ml 0.8Ω cartridge (spare)
1x Type-C USB charging cable
1x User manual For UK delivery options and timescales, visit the Delivery & Shipping page. Frequently Asked Questions
What is the Super Pulse System on the OXVA NexLIM 2?
The Super Pulse System maintains consistent wattage output as the battery depletes. Standard pod kits produce progressively weaker draws as the battery drops from full — flavour fades and vapour production falls. Super Pulse prevents this by sustaining stable output throughout the charge cycle. The draw experience is designed to remain more consistent from the first puff to the low-battery notification (usage dependent). What pods are compatible with the OXVA NexLIM 2?
The NexLIM 2 uses OXVA NexLIM replacement pods with Unitech 3.0 Dual Mesh technology. These are not compatible with OXVA Xlim pods, XROS pods, or any other OXVA pod series. Buyers switching from another OXVA device will need NexLIM-specific replacement pods. Two pods are included in the box: a 0.6Ω pod (pre-installed) and a 0.8Ω pod (spare). What is the difference between Power Mode and ECO Mode?
Power Mode sets the device to maximum output, delivering stronger draws, more vapour, and maximum flavour from the Unitech 3.0 pods. ECO Mode reduces the output to extend battery life — ideal when charging is not immediately available or for lighter vaping sessions. Both modes are selectable on the device and the colour display confirms which is active. How do the three airflow levels work on the NexLIM 2?
The NexLIM 2 has three specific airflow positions. The tight MTL position gives a cigarette-like restricted draw, suited to 20mg nicotine salt with the 0.8Ω pod. The medium position is a balanced MTL/RDL crossover. The open RDL position gives a looser, more vapour-forward draw, suited to 3–6mg freebase with the 0.6Ω pod. How long does the OXVA NexLIM 2 battery last and how fast does it charge?
The 2000mAh battery gives most vapers a full day of use between charges. With 3A fast-charging USB-C, the battery reaches 80% in 20 minutes and a full charge in 50 minutes. The Super Pulse System ensures consistent draw performance throughout the charge cycle. The colour display shows battery level at all times. What e-liquid should I use in the OXVA NexLIM 2?
Pod choice determines the right e-liquid. The 0.6Ω pod (pre-installed) suits a looser RDL draw — use 3–6mg freebase in a 50/50 or 60/40–70/30 VG/PG blend. The 0.8Ω pod (spare in box) suits a tighter MTL draw — use 20mg nicotine salt in 50/50, or 50/50 freebase at 3–6mg. See the resistance guide above. Important Information UK TPD compliant — refillable device, no e-liquid or nicotine included
18+ only Compatible with OXVA NexLIM replacement pods (Unitech 3.0) only — NOT compatible with Xlim or other OXVA pod series
If you have a medical condition or are taking medication, seek advice from a healthcare professional before use
Keep out of reach of children
Charge on a fire-safe surface — do not leave charging unattended
Store away from extreme heat and direct sunlight
See our Returns policy for eligibility
